Laminating machine: also known as "over-plastic", "tank", "film", etc., refers to the effect of protecting and increasing the gloss by applying a transparent plastic film to the surface of the printed matter by hot pressing. Laminating has been widely used for book covers, albums, commemorative albums, postcards, product brochures, calendars and maps for surface finishing and protection. At present, common film packaging products include cartons, cartons, handbags, fertilizer bags, seed bags, and self-adhesive labels.
Coating film: also known as paint film. A solid continuous film of one or more coatings applied to a substrate. Usually, the coating film is composed of multiple coatings, and the amount of coating is determined according to the requirements of the article to be coated. Typically, a primer layer, an intermediate coating, and a topcoat layer are included. The coating film reflects the effect of the coating.
Laminating machine: The fabric is woven with polypropylene or low-pressure polyethylene. After special treatment, the surface is covered with a layer of high-voltage polyethylene electrostatic film with a thickness of only 0.04 cm. Its thickness is only 0.2 ~ 0.24 cm, the weight per square meter is only 160 grams, less than 1/10 of the weight of the general cotton gauze tarpaulin, but its longitudinal and transverse tensile strength can reach up to 120 kg, the temperature resistance from 70 ° C to minus 40 °C, and it is odorless, non-toxic, wear-resistant and resistant to cockroaches. It can be used for a long time under various ecological or physical and chemical environments such as infrared rays, ultraviolet rays, laser or wind, frost, snow and acid.
